|
PROGRAMMING SYSTEM
We
can offer a number of optional programming systems which can be
used with both Campa and Noirot heaters.
|
|
Progtout
Centralized manual programming system
 |
Progtout provides centralized manual programming to ensure complete control and prompt, responsive heating.
Features:
-
Centralized programming system
Operating independently and connected via pilot wire, the Progtout directly controls all electric heating components in comfort, economy and frost protection modes.
- Manual programming system
With this system, connected in series between a central (1 or 2-zone) programming unit and the electric heat emitters, it is possible to exit the prerecorded program (without modifying it) and enter manual mode to control all components in comfort, economy or frost protection.
|
|
Me'moprog radio frequency
Central radiofrequency programming system
 |
Me'moprog Radiofrequency provides
centralized programming via radiofrequency without installation or running wires. The programming unit manages up to three zones and can be mounted on a wall or anywhere else in the home.
Features:
- The system operates with a central programming unit and one or more receiver modules placed in the designated heaters.
- The central ERF unit uses radiofrequency to control up to 4 modes (comfort, economy, frost protection or off) and up to 3 different living zones.
- The RRF receiver modules receive mode information from the central unit, modify operation of the heaters and display the current command via lighted indicator.
- Each ERF central unit comes with 3 pre-programmed sequences or programming can be entirely
customized.
|
|
Me'moprog carrier current
Integrated programming system via carrier current
 |
A programming system with central transmitter that fits perfectly into the heater. This system does not require batteries, eliminating risk of power cut or memory loss.
Features:
- System operates with one ECP transmitter module and one or more RCF receiver modules.
- The module sends information on up to 6 modes (comfort, economy, frost protection, off/load-sharing, comfort -1°C, comfort -2°C) directly to the other heaters via the electric wires without any need for additional wiring.
- The RCF receiver modules placed in the other heaters receive this information, modify operation of the heaters and display the current command using a lighted indicator.
- The module is preconfigured with 7 standard programs to suit almost any lifestyle requirement and programming can also be fully
customized.
|
|
Me'moprog pilot wire
Integrated Programming System via Pilot Wire
 |
A programming system with central transmitter that fits perfectly into the heater. This system does not require batteries, eliminating risk of power cut or memory loss.
Features:
- System operates with IFP transmitter module placed in heater.
- The module sends information on up to 6 modes (comfort, economy, frost protection, off/load-sharing, comfort -1°C, comfort -2°C) to the other heaters via an additional connection wire referred to as a 'pilot wire'.
- The other heaters receive the information directly via this wire connected to a programmable electronic control unit displaying the current command using a lighted indicator and modify their operation as directed.
- The module is preconfigured with 7 standard programs to suit almost any lifestyle requirement and programming can also be fully
customized.
|
|
|
